T SERIES HIGH-SPEED DRILLING AND TAPPING CENTER MACHINE

》Product features

1. Super wide base, saddle, table, column, spindle box, and other main structure casting are made of advanced Meehanite cast iron and under twice annealing treatment and more than three months of aging, to ensure the machine can maintain the best accuracy for a long time, and to ensure the structure of high rigidity and stability.

2. High precision spindle, assembled with P4 grade bearings, with a maximum speed of 24000rpm.

3. After flushing to remove chips, coolant circulation flushing; Reduces the accumulation of chips and facilitates the cleaning of chips inside the machine tool.

4. The fully enclosed outer sheet metal design avoids the impact of oil mist generated by high-speed processing on the workshop environment and the health of employees and meets the environmental protection requirements and humanized design.

5. 21T clamp-arm type tool magazine for efficient tool-changing.

6. The three-axis drive system adopts a direct drive C3-grade precision ball screw and P-grade ball guide, with high rigidity, low friction, and low noise.

7. Optional four-axis linkage indexing discs or five-axis indexing discs (Taiwanese units of measurement) can be provided to meet customers' diverse processing needs.

8. High-speed direct drive spindle 20000rpm

9. Three-axis high-performance P-grade ball roller rail

10. Equipped with high-speed DDR turntable

11. High-performance spindle unit

12. Spindle speed: Standard 20000 rpn

13. 16/21T servo tool magazine

14. Three axis 48/64m displacement velocity

15. Air filtration system

The air filter solenoid valve is paired with a three-point combination unit to detect the pressure, and the insufficient pressure appreciation system will generate an alarm message to ensure the normal operation of the machine and greatly extend the life of other main control units.

16. Automatic Lubrication System

Adopting a centralized lubrication system to provide lubrication for transmission system components to ensure accuracy. When the transmission system stops for a preset period, the lubrication system will pause the oil supply to achieve energy-saving effects.

17. FANUC OI-MF control system

Adopting the latest version of the Japanese FANUC control system, to achieve high speed, precision, and efficiency for precision parts machining.

18. A perfect combination of servo motor and driver.

19. Aluminum alloy one-piece constructed tool jaw is fast to assemble and replace with high precision.

20. DRILLING AND TAPPING CENTER MACHINE SERVO TOOL MAGAZINE

1. With a 250mm tool length, the rotation diameter of TDS3016T is only 930mm.
2. With a 250mm tool length, the rotation diameter of TDS3021T is only 1040mm.
3. TD30 and TDS30 employ the same tool magazine holder for convenience in only replacing the tool magazine, to make the production line allocation operation smoother.

Product specification
Tool position NC	16	21
Tool specification	BT30
Maximum tool length	250mm
Maximum tool diameter	80mm
Maximum tool weight	3kg
Maximum offset load of cutter bin	12kg		15kg
Maximum load of cutter bin	25kg		35kg
Single tool time	0.3sec
Cutter head mode	SANJET Servo motor

 

21. Scope of application

This series of products is mainly used in industries such as small metal structural components, 3C, automotive consumer products, 5G communication cavities, and related components

T SERIES HIGH-SPEED DRILLING AND TAPPING CENTER MACHINE

❈Control system

Standard: Fanuc

Optional: Mitsubishi, iNC, Syntec

❈Remark

Among the above model parameters, some individual models include special accessories, please note this when ordering.

Technical specifications are subject to change without prior notice, the picture parameters in the sample are for reference only, the right of interpretation belongs to Huaen Company.

Henan Huaen Intelligent Equipment Co., Ltd

Machine type	Unit	HN-T500	HN-T600	HN-T700
Journey
X axis left and right travel	mm	500	600	700
Y axis forward and backward travel	mm	400	400	400
Z axis up and down travel	mm	300	300	350
Distance from spindle nose to column	mm	150-480	150-450	150-450
Distance from spindle center to column	mm	420	450	470
Workbench
Workbench area	mm	650*400	700*400	780*420
Maximum load	kg	300	350	500
T-slots (width*number of slots*spacing)	Mm*pcs*mm	14*3*125	14*3*125	18*3*125
Axial feed
X, Y, Z axis fast feed	m/min	48/(64)	48/(64)	48/(64)
Spindle
Tool magazine unit	ATC	16／21T (servo clamp-arm type)	16／21T (servo clamp-arm type)	16／21T (servo clamp-arm type)
Spindle speed	rpm/min	12000/15000/20000/24000
Spindle specification	BT	BT-30	BT-30	BT-30
Spindle motor	Kw	5.5	5.5	5.5
General information
Triaxial power	Kw	1.5/1.5/3	1.5/1.5/3	1.5/1.5/3
Positioning accuracy	mm	±0.005/300	±0.005/300	±0.005/300
Repeatability	mm	±0.003/300	±0.003/300	±0.003/300
Cutting feed speed	mm/min	1-12000	1-12000	1-12000
Electricity demand	KVA	15	15	15
Barometric demand	Kg/bar	6-7	6-7	6-7
Pump demand	Pcs	2	2	2
Machine cover area	mm	1700*2100*2500	1750*2500*2500	1880*2450*2460
Machine weight	kg	3500	3600	3700

 

If you'd like to know more about our machining centers, feel free to contact me

by WhatsApp/WeChat/Phone: +86 15138637091 or

by email: huaenmachining@gmail.com
Look forward to hearing from you : )